JDMA02 Manual gynecological examination bed

•  Product parameters：

The surface of the gynecological examination bed is smooth, clean, free of burrs, bumps, and rust marks. The welding joint is firm, without sand holes, burns, cold cracks, or welding leaks. The bent part of the bed legs is symmetrical, with a gentle angle and consistent bending angle. The leg rest and handle are firmly fixed, and the lifting and rotating are flexible.

• Scope of application：

Suitable for gynecological examinations or simple surgeries in medical institutions.

• Available colors：

Pink, blue, black, customizable colors available in large quantities.

• usage method：

1. According to the doctor's request, the back frame or ankle frame can be raised or lowered.

2. The lifting or lowering of the back frame and foot frame is achieved by clamping the horizontal support frame rod at the lower end of the two legs of the bed through the support frame with a groove to complete the angle of lifting or lowering.

• Storage and transportation：

This product should be stored indoors in a dry and well ventilated area, with no harmful or corrosive substances in the surrounding area. During transportation, measures should be taken to prevent snow and rain, and hazardous substances should not be mixed for transportation. Can be transported by general transportation vehicles.